2 gale iq option
Simply go ahead and select the InstantClient option from the opening dialog form and click Next. The following screens simply require you to click Next when enabled. These are in place to present the internal checks and summaries of work to be completed once you accept the install parameters. Proceed through the screens, click Install, and then Finish once the installation is complete. Step Two Installation Oracle 10g Release 2 64-bit ODAC software.
Once you have an installed 64-bit Oracle Home you can proceed with installing the ODAC drivers for a 64-bit environment. The OraOLEDB. Oracle driver installed in this step is what you need to set up your linked server. You ll find the setup. exe for this installation located in the unzipped Install folder.
I strongly suggest you review your previous installation of the client software via selecting the Installed Products button. You want to verify that you have a valid 64-bit Oracle Home that you ll be installing against during this process. We would not be DBAs if we were not overly cautious. If you accepted the defaults during the client installation, your Installed Products Inventory should appear as follows.
If so, then close the dialog and click Next to continue. We have two SQL 64-bit clusters in our organization a four-node production cluster and a two-node dev test cluster. If not, then I suggest you revisit your installation of the client software, possibly de-installing and performing all steps presented previously once again. We will be installing the OraOLEDB. Oracle driver that is included in the Oracle Data Access Components option below. Select Next to continue. Using the drop-down box provided, select the existing Oracle Home you just verified was created as a part of your 64-bit Oracle client installation.
The Path will automatically change accordingly. Continue by clicking Next. You will be presented with the following sub-components. I ve selected all three you never know when these items may be useful and they are extremely lightweight though you only really need to install the first two items. If you do decide to install the Oracle Services for Microsoft Transaction Server component, you ll be prompted for the port number to use. The default is 2030. Click Next and you ll be presented with the familiar summary screen, listing all components to be installed.
Review, make changes if necessary and then click Install. Once completed we can move back to familiar territory SQL Server Management Studio. Step Three Restart SQL Service. This is the most unfortunate step in the entire process. This is usually the last thing a DBA wants to do. It is the option of last resort whenever there is an issue on a SQL Server instance. However, it is necessary in this case, so be sure to follow your corporate procedures for downtime notifications and process.
That being said, let s move past this horrid step. It s quite Darwinian the brash and risky don t last long as Database Administrators. Oracle provider. Step Four Configure OraOLEDB. I was not aware of this process existing until I had to do this the first time. In Object Explorer, navigate down the tree of the SQL instance we ve been working with until you re able to view the list of Providers under Linked Servers.
Select OraOLEDB. Oracle and right-click. The Provider Options dialog box appears. Enable the Allow inprocess option and close the dialog. Now ask yourself Self, what did I just do. Some Internet Guy said click this and it will work. Let s take a quick look at exactly what enabling this option does for a provider. By default, OLE DB providers are instantiated outside of the SQL Server process.
While this protects SQL from any OLE DB errors, Microsoft SQL Server requires that the OLE DB provider run in-process for handling BLOB-ish data types text and images. Step 5 Create Linked Server and Add Logins. Finally, something we re all familiar with. The T-SQL is simple, and identical to the 32-bit platform. A quick explanation about the datasrc parameter.
Since our environment is clustered I do not like relying on an Oracle TNSname. ora file for our connection information. As for creating an associated login the format is. It is far cleaner to specify the data source in terms of the SERVER PORT DB_NAME format. By setting the value to FALSE you re stating that you wish to connect to the linked server with a supplied login password combination that is being identified in the rmtuser and rmtpassword parameters respectively.
Briefly, the useself parameter determines whether the current user in connects to the linked server source under its current context or via impersonation. A value of TRUE would suggest that a login will use it s own current credentials to connect to the linked server. Creating a login for the LK_TIPS linked server we just created with a login of sa and a password set to password would look like this.
Before you get any crazy ideas, I don t suggest using sa password as a combination for any system. Tweak T-SQL code provided to fit your environment If this is being configured in a cluster, be sure to install the Oracle client and ODAC components identically on all nodes in the cluster. Review related tips on linked servers. Last Updated 2008-02-13. Tim Ford is a Senior Database Administrator with MindBody. can we add Oracle server using sp_addlinkedserver in sql server 2012. Wednesday, December 12, 2018 - 4 50 53 PM - Charles Spence Back To Top 78473.
Do you have an update for recent SQL Mgmt studio and later versions of Oracle. we need for project the Oracle 10g 64Bit Odac client components. Wednesday, March 21, 2018 - 6 22 28 AM - email protected Back To Top 75489. Do you know or anybody else where we can download this nearly 20 year old pice of software. Friday, November 10, 2017 - 1 40 09 AM - NUR Back To Top 69503. Tuesday, August 11, 2015 - 12 11 55 AM - RAJESH Back To Top 38417. Monday, April 08, 2019 - 6 21 49 AM - ankush Back To Top 79497.
i have done linked server like above artical only but here i am geting linked server but i am not geting data from destination. Oracle for linked server SAP MICROSOFT SQL SERVEE,Error 7303. whilw opening the table folder i am geting error like cannot initalize the data source object from ole db provider Ora. can you please give soluyion for this asp.
Tuesday, January 27, 2015 - 8 24 04 AM - Sid Back To Top 36068. This help us to resolve Oracle Link server creation issue. By using the above commands we are able to create Oracle Link server with different port. Friday, October 25, 2013 - 1 57 34 AM - Irene Back To Top 27275. Wonderful article. This has fixed my issue after i install and uninstall oracle 32bit and oracle 64bit clients.
I am glad that we don t need the 32bit Oracle client after all as in other blog indicated. I have apply this to SQL2012 x64 with Oracle 11gr2 x64. Great article Tim. Thursday, August 15, 2013 - 8 54 18 AM - Doug Purnell Back To Top 26323. I was able to follow your steps with the 11G R2 64bit client and everything worked. It s nice to be able to not have to manage the TNS files for linked servers. Friday, July 12, 2013 - 1 42 07 PM - Lava Back To Top 25820. Great article, thank you so much for the clear steps to follow.
It would be great if you please update your article to include Windows vesion you are using for your steps since these steps can be more complex when installing 10g in Windows 2008 R2 server. The other thing would be greeat is to iclude the file links from Oracle site to do the installation. I was not able to install 10g ODAC in Win2008, so I had to use 11g and run it from command line.
Once again, thanks a lot. Thursday, May 30, 2013 - 6 05 19 AM - Albert Back To Top 25195. I read somewhere else about changing the values in some of the registry settings, but your article does not mention any of this. What do you think - is it required. The changes were. Monday, June 04, 2012 - 9 13 01 AM - John Back To Top 17793. Using this article as a starting point, I have developed a slightly different method that is working well in my environment.
I developed this method because using the article s suggestion for specifying the datasrc parameter of the linked server definition yielded unreliable results. On some SQL Servers it worked just fine, on others it did not. In my environment, the revised step 5 below works reliably on all SQL Servers on which it has been implemented. Steps 1 through 4 remain the same note that the Oracle 11 client install is a single step replacing the steps 1 2 in the original article. Contact the Oracle DBA and ask for a tnsnames.
This is where the FQDN for the Oracle server is defined. Mine looks like this. Generated client tnsnames. ora from usr local scripts config generate_tnsnames. Where DATABASE_NAME and ORACLE_SERVER_FQDN are values for the specific Oracle instance to which you are connecting. Ask the DBA about any parameters that need to be set in the sqlnet. ora Network Configuration File D app oracle product 11. Generated by Oracle configuration tools. This file is actually generated by netca.
But if customers choose to. install Software Onlythis file wont exist and without the native. authentication, they will not be able to connect to the database on NT. DIRECTORY_PATH parameter is important. Assuming you installed the Oracle client in C Oracle, copy tnsnames. ora into C Oracle product 11. ora and sqlnet. 0 client_1 network admin replacing any existing files make a backup first.
Create the linked server using the following script. LINKED_SERVER_NAME is the name of your linked server object. ACCOUNT_USERNAME and ACCOUNT_PASSWORD are your Oracle server credentials. Thursday, March 01, 2012 - 7 47 34 AM - Greg Back To Top 16228. DATABASE_NAME is the value from the tnsnames. I found this article whilst trying to research problems with datsrc N server port database.
I have an oracle linked server working successfully but it uses plink encryption that runs non the localhost so that the TNS entry is TUNNEL DESCRIPTION ADDRESS PROTOCOL tcp HOST localhost PORT 15211 CONNECT_DATA SERVICE_NAME oradb02. If I use datsrc TUNNEL all is fine but I have tried everything without success to by pass TNSNames. g datasrc N localhost 15211 oradb02 or N n. Friday, August 19, 2011 - 2 10 35 PM - Cynthia Back To Top 14450. I found your article precisely because I was asking myself the question Just because someone on the internet says to click allow inprocess on the OraOLEDB.
And you answered my question. Thursday, July 14, 2011 - 12 27 05 PM - Andreas Mohr Back To Top 14171. Oracle provider, what exactly does that do, and why should I do it. I guess the error occured because ODAC was already installedbut I have no way to verify that. 3 ODAC installed, everything is fine at the moment. Linked server is working. Dont forget to set the option for the oracle provider under linked servers as described in the article.
I was very cautious when creating the linked server this time. Obviously in a misconfigured environment the database times out and you need to reboot the server when accessing the linked server. I manually configured the linked server in SQL Server Management Studio. this is my configuration Server the name I entered here matches the name of the tsnames.
ora entry, you might be able to enter whatever you pleas, but in case youre experiencing problems give it a try. Provider Oracle Provider for OLE DB Product Name Oracle Data Source I entered the fully qualified way in the notation server port databasename Povider String OraOLEDB. I cant tell if using the sp_addlinkedsrvlogin statement 2 gale iq option a problem. Thursday, July 14, 2011 - 9 02 03 AM - Andreas Mohr Back To Top 14170. Under the security tab I entered my Windows User with his domain and mapped the oracle user without selecting Impersonate Additionally I marked to sign in any user that is not contained in the list to use the oracle user those are the radios and the two fields at the bottom of the window in the seurity tab.
We are Running SQL Server 2008 on Windows 2008 R2 Server with 64bit. The article is excellent, but I semm to have problems installing the ODACs. Oracle Client is already installed TNS Ping Utility for 64-bit Windows Version 10. A tip for people who cannot find the Oracle Client Software don t go to whe Oracle Dowload Pages and look for the software in the list, even worse the oracle search wont retrieve the downloads either.
The best bet is to use Google an search for Oracle 10g Release 2 64-bit client software. Among the search results I find 64-bit Oracle Data Access Components ODAC for Windowsbut they are only offered as 64-bit Oracle 10 g Release 2 ODAC 10. 3 for Windows x64. My Problem after unpacking the zip and starting setup. exe I will only get error messages. Java TM 2 Standard Platform Edition binary has stopped working.
I am missing a readme with the files I downloaded, but the real pain is that I couldnt downlioad the ODP. NET documentation from the Oracle website. wow, and I hear everybody complaining about Microsoft, this is getting a real pain in the behind. So I made a guess I started a command prompt, changed directory to the downloaded and unzipped files and ran access_setup. bat A couple of DLLs were copied and I was asked to restart Jaws. Whatever Jaws is. I did not find anything useful on the first page of the search results, so I rebooted the server.
So now I tried running the ODAC setup using command prompt. was a good idea for the access_setup. only to receive the same error. Is this a compatibility issue between 10. 0 client and 10. I installed the most current Java jre-6u26-windows-x64. Monday, March 22, 2010 - 9 45 45 AM - peterb Back To Top 5093. What level of encryption is implemented between these servers. Can I set it to say, 128256 or higher. We need to be assured of a level of security. Wednesday, July 15, 2009 - 5 07 55 PM - sonomaRIK Back To Top 3740.
I have a restricted Oracle 10g server. The OS is limited to just a few users as it is a HRMS system. I have a need to connect link an MS-SQL 2005 server to the Oracle instance, but have run into a couple problems from your instructions. I did NOT install the Oracle on the box to be accessed. I know the instance name, and the ID PWords for the OS and the SYSDBA sysoper too on that Oracle instance. I have tried to download just the client from Oracle and cannot get any thing you showed in your excellent post That is, I can only obtain, it seems the Oracle DATABASE download for 10g and have no options for a client portion only.
Searched quite a bit for the client and not getting there. I also, understand I need to load that Client portion on the MS-SQL server that houses MS s instance I want to link to the Oracle instance. I do NOT want to install another Database Oracle or otherwise. The DMZ Restricted Oracle server site, I believe, shouldn t be a problem if I provide the SYS SYSDBA or equivilent IS PW to the Oracle site.
Can you assist me in understanding what I am doing incorrectly. Friday, June 12, 2009 - 3 52 37 AM - mail2bindueldo Back To Top 3546. Lastly, can you help me understand the correct PORT to use, as the only PORT I use is connection to the Enterprise Manager via a Remote Desktop connection. I am trying to create a linked server from SQL server to Oracle. Could you please tell me the steps. Its in a different network. But I am able to ping sql server IP from oracle machine.
I gave the host name of the service as IP address of Oracle machine. When I try to create the Linked server by giving IPaddress oracledatabasenameit is giving me the error TNS No listener. But I made sure that lsnrctrl is on in that machine. Friday, March 20, 2009 - 11 49 26 AM - gwungfu Back To Top 3047. It s interesting issue and the fix I have for sql 2005 64 bit environment connecting to Oracle 9i is to install Oracle 11g 32 bit client as well as 64 bit client.
Oracle 32 bit client is used for SSIS connection manager. Oracle 64 bit client is used for Oracle Linked Server. Thursday, July 10, 2008 - 5 30 50 AM - timmer26 Back To Top 1390. I would guess that the driver is not Windows 2008 compatible. Did the Oracle download site state is was for Windows 2008 64-bit. Thursday, July 10, 2008 - 5 17 41 AM - ThinkPad Back To Top 1389. Hi Tim thank you for your answer.
Yes I have tried almost anything. It s Server 2008 and SQL 2005. Thursday, July 10, 2008 - 5 00 24 AM - timmer26 Back To Top 1388. Unfortunately I don t have a Windows or SQL 2008 instance of 2 gale iq option 32 or 64 bit to test through this. Have you checked the Oracle support site. Environment OS Windows server 2008 64-bit SQL SQL Server 2005 64-bit SP2 plus hotfix KB949095-x64 aka hotfix 3239 Oracle Oracle Client 10g 10.
21 32-bit For server 2008 no 64-bit available yet We tried installing the Windows 2003 64-bit version but it won t install. ODAC ODAC software 10. Cannot find provider OraOLEDB. Thursday, July 10, 2008 - 3 20 19 AM - ThinkPad Back To Top 1387. oracle in SQL Server Management Studio Server Objects Linked Servers Provider. Wednesday, March 26, 2008 - 7 42 38 AM - timmer26 Back To Top 784.
John, the linked server is an object on the SQL server. It is not workstation-dependent. Are the data sources in the report using the 64-bit SQL instance that has the linked server configured. Also, just curious if you re able to natively connect to the Oracle database from SQLPlus on the m c in question. Tuesday, March 25, 2008 - 5 35 59 PM - dbajohnny Back To Top 780. Were you able to complete the steps outlined in this tip successfully.
Can you successfully set up and query the linked server from within SSMS, not BIDS. Is it compulsory to do set up linked server from SSMS. Without that linked server can t we connect using BIDS. Are you getting a specific error in BIDS. Test connection failed because of an error in initializing provider. 1 provider is not registered on the local machine. I used different providers also getting same error. Are you running BIDS from the server you installed the driver on or are you doing your BIDS work from a different workstation server laptop.
If so, you ll need to install Oracle on that instance and configure a connection from there during your build before you deploy it. I am running BIDS from different m c. Here i installed client s w of Oracle. pl can you give steps. How can i configure the connection. Friday, March 21, 2008 - 7 11 25 PM - dbajohnny Back To Top 766. Monday, February 18, 2008 - 6 12 20 PM - timmer26 Back To Top 302.
A Few questions. Thursday, February 14, 2008 - 7 40 15 PM - dbajohnny Back To Top 290. I got same problem anybody help. Thursday, February 14, 2008 - 6 57 19 PM - dba. kishan Back To Top 289. Urgent need help from anybody reg. SSIS Packages on 64 bit. We are currently facing the problem with building 64 Bit SSIS pacakages located on DB Server. which is 2003 Server Edition, 64 Bit with connecting 32 bit oracle loaded on the App Server.
Windows 2003, 32 bit in Business Intelligent Development Studio Integration Services with Sql Server 2005 64 Bit. We have installed 64 bit Oracle client and network tools and drivers on Database Server DB Serverbut we are still unable to connect from to Oracle from the BIDS for making the 64 bit SSIS packages. Please give guide me towards the steps for testing SSIS packages which are in 64 bit Using XML files. how to proceed towards making these packages. For Windows 2003 the above procedure works fine, but what to do in 2008.
See you around. UC Davis Bookstore TechTalk. Take a look around and grab the RSS feed to stay updated. Apple Contests How-To JJ s Big Mouth Kyle s Cheaper Alternatives Macworld 2009 Netbook Week 2009 Previews Reviews TechTalk Podcasts TechTalk Q A Uncategorized WWDC 2009. How-To Install a 32-bit Program in 64-bit Mac OS X 10. Author Mike Adams 12 09 2009. So, you have yourself the fancy new Apple operating system, Snow Leopard, and you also bought yourself a few software titles.
You rushed home and installed that shiny new OS on your Mac and it runs like a dream. You even opened up more of your hard drive after the installation. Good thing you just bought some software to fill up that space. So you pop in your Adobe Acrobat Pro 9 to install it, and you are greeted with the message, Adobe Acrobat 9 Pro can t be installed on this computer. Make sure your system meets the requirements.
You have a relatively new MacBook Pro so this must be some sort of mistake. Well, it is kind of. What might be happening in this case is that you could have your new OS set up to run in 64-bit mode. How is this a mistake. Adobe, and many companies, have programmed their installers to run in 32-bit mode since before 10. 6, this was THE most common method of running your operating systemand again, you might have your OS set to run in 64-bit mode.
This really doesn t help your situation though. Adobe has patches for its programs in place for this if you already have your programs installed, you know, so that you can continue to run their programs in 64-bit mode. So how can you install your program. Well first, you need to see if this is really the problem. To do this, just. Thanks for dropping by UC Davis Bookstore TechTalk. Head to the Apple Menu located at the top left of your desktop and click on it.
Next click on the option, About this Mac. Now, you should see an option for More infoclick on this to take you to System Profiler. Scroll down on the left hand pane until you see Software. Click on this and you will see an overview of your System Software. Look for 64-bit Kernel and Extensions and it should either have yes or no. If it says nothen that means that your OS is already running in 32-bit mode.
If it says yesthen that means that you are indeed running in 64-bit mode. If you are running in 64-bit mode, you will have to force your machine to run in 32-bit mode while you install and patch. To do this, you will need to. Restart the computer and hold down the 3 and 2 keys on boot up. This will send your OS into 32-bit mode until you restart. Double check to make sure that you are indeed in 32-bit mode after this using the steps above.
Once you have verified that you are in 32-bit mode, just install and patch the program. Restart your computer and your OS should automatically default back to 64-bit mode. I just wanted to let everyone know that there is a nice short article about 32-bit software running on 64-bit Windows machines I found. com 2009 05 27 simple-facts-about-64-bit-computing to check it out. UC Davis Stores TechHub. UC Davis TechHub Twitter Feed. Error Twitter did not respond. Please wait a few minutes and refresh this page.
HP and other OEMs are planning to increase the number of 64-bit choices in the volume server space. HP Adds to 64-Bit Computing Options. The dramatic changes in the 64-bit computing landscape over the past few weeks have left users in the volume server space with something they had little of before last month choice.of Palo Alto, Calif. Hewlett-Packard Co.added to that last week when it unveiled its long-expected plans to offer a line of ProLiant servers powered by Advanced Micro Devices Inc.
Coupled with announcements last month by Intel Corp. that it will add 64-bit extensions to its Xeon processors and Sun Microsystems Inc. s rollout of its Opteron-based systems, HPs decision greatly broadens users options as they plan their eventual move to 64-bit computing. Sixty-four-bit computing is already commonplace using RISC-based processors. In the volume server world, the only real alternative has been Intels Itanium, an architecture separate from x86.
Within the next few months, users in the x86 volume space will have a growing number of Xeon- and Opteron-based options from all the top OEMs that will run both 32-bit and 64-bit applications. Gordon Haff, an analyst with Illuminata Inc.said that for the next year or two, 64-bit computing will be used mainly in larger corporations and for high-performance computing applications.
But as mainstream applications start rubbing up against the memory limitations of 32-bit processors and as memory-hungry technologies such as virtualization grow, enterprises will begin turning toward 64-bit extended systems. The 64-bit horizon Feb. 10 Sun unveils line of Opteron-powered servers and systems with new UltraSPARC IV chips Feb. 24 HP announces Opteron-based ProLiant servers.
For Townsend Analytics Ltd.a financial services software developer that has several hundred HP ProLiant servers in its data center, the 64-bit extensions offered by the Opteron and the upcoming Xeons give the Chicago company the flexibility it needs. Developers at Townsend twice looked at Itanium systems over the past three years but decided against them, questioning the amount of operating system support and whether they wanted to be tied to a single architecture.
It actually gives us what we ideally wanted in the first place, which is to get to the point where we can take advantage of the high speed and high memory of 64-bit computing and get better performance out of our current 32-bit applications, said Jason Weil, Townsends head of software development. 17 Intel introduces Xeons with 64-bit extensions; most major OEMs sign on Feb. Project Management PM software has become wildly popular in recent years, and that means there are plenty of options to choose from.
Blue Planet INS. Turn up services quickly with an accurate, end-to-end, multi-layer inventory view. s 64-bit Opteron processor starting this month. HP Compaq 8510w 64-bit option. Recent Laptop Reviews. Forum Spotlight Fix Notebook Throttling, Backlight Bleed Forum Spotlight Stadia Impressions, Laptop Building Help Forum Spotlight RAM Requirements, The Outer Worlds Forum Spotlight Nvidia Quadro RTX 6000 in Notebooks Forum Spotlight DIY Notebook Mods Edition.
Contact Us Help Home Top RSS. TechTarget publishes more than 100 focused websites providing quick access to a deep store of news, advice and analysis about the technologies, products and processes crucial to the jobs of IT pros. MP3 to Wave Converter Plus Knowledge Base. Last updated February 29th, 2016. The right-click menu doesn t work with 64-bit versions of Windows.
We do not have any updates that fix this problem. There are three solutions to the issue. The easy solution. Download WOW64Menu from this link and install it. You ll now have a new option called Show Wow64 Menu when you right click an audio file. It looks like this. Once you click it, you ll see the Acoustica converter options as expected.
Other possible work arounds. Right-cick on the Windows desktop, select New and then Shortcut. In Type the location of this item, copy and paste the following without quotes Systemroot SysWOW64 explorer. Click Next and in Type a name for this shortcut call it Windows 32 bit Explorer. exe separate. Use that icon to browse to the location of your songs and you ll be able to convert them with the right-click menu. Windows 7 users note the 32-bit explorer shell work around outlined above does not work with 64-bit Windows 7.
The other way to use the converter with 64-bit Windows is to use the command line interface. Bring up a Windows command line interface by clicking on the Windows Start menu and typing command in the Run box or the Start Search box. mp3towave -C path_to_audio_file. Note that it needs the quotes around the path to the audio file and the c needs to be a capital C. Of course, the Audio Converter Pro executable directory must be in your path variable or you must put the explicit path to the executable in the command line call.
If you are converting to MP3, you ll need to specify the -3 flag. Flags -3 Convert to MP3 -C Convert to WAV -M Convert to WMA -G Convert to OGG. You can use the converter via the command line like this. For example to convert a. wma file into a. mp3 file, It might look like this. mp3towave -3 c my music mysong. If you are not in the converter folder, you could type.
I-Mobile IQ X Lucus DTV with 64-bit SoC, 18MP rear camera and Digital TV. The I-Mobile IQ X Lucus DTV sports a 5-inch 1280 x 720 pixels HD IPS LCD display, powered by a 64-bit quad-core Qualcomm Snapdragon 410 processor which clocks at 1. 2GHz with Adreno 306 GPU, 1GB of RAM and 16GB space of internal storage. This year alone, we are starting to see a flurry of devices which come pre-loaded with Digital TV; Microsoft recently has a Microsoft Lumia 640 with digital TV for Brazil and the I-Mobile IQ X Lucus DTV is an Android low-midrange smartphone from Thailand with Digital TV DVB-T2 and has a dedicated Antenna for receiving transmission for TV channels.
There should be a microSD card slot on-board which expands storage up to around 32GB more space. On the rear, the device packs a 18MP main camera with f 1. 0 aperture; both cameras have LED flash. 8 aperture and a front facing 8MP snapper with f 2. Connectivity options on the device includes Bluetooth 4. 0, GPS A-GPS, WiFi or Mobile Hotspot, 802. 11 b g n Wi-Fi, microUSB v2.
5mm audio Jack and 3G WCDMA 4G LTE Cat. The I-Mobile IQ X Lucus DTV is Dual SIM enabled WCDMA GSMcomes with FM Radio, Flashlight Torchlight and is backed by a 2300mAh lithium polymer battery. It measures 149. 4mm, weighs 145 grams and runs on Android 4. Share the post I-Mobile IQ X Lucus DTV with 64-bit SoC, 18MP rear camera and Digital TV. Midrange I-Mobile IQ XPRO 3 with octa-core SD 615 SoC, LTE and Android 5.
2 Microsoft Surface Duo Now on Pre-Order For US 1,399 Google I O 2020 Scheduled For May 12 14 Evolution of Android From 1 to 10 Infographic Google Confirms Android Q Will Be Android 10 Recap Huawei Announce HarmonyOS, EMUI 10 at HDC 2019 Android Q Focuses on Innovation, Security and Privacy and Digital Wellbeing Project Fi Rebrands as Google Fi, Now Available On Android and iOS.
The device is available in Thailand for around 6500 Thai Baht 197. Twitter has announced the rollout of 2 gale iq option tweet feature to device using the iOS version of the app. The company announced via its official blog that it has commenced testing this feature with a handful of Twitter for iOS users and will eventually extend availability to other iOS users in the coming weeks.
Twitter Launches Voice Tweet for iOS Devices. Yes, i have the Serial number and ID. I need to download windows 7 home Premium 64 Bit with sp1 to do reapair on laptop. Hello, I am repairing my friends laptop who is NOT technical and did not make restore discs. I need Windows 7 Home Premium 64 bit version. I have the Serial number on the bottom of the laptop.
Its and Acer Aspire. You would THINK Acer would have a download available. I GET that the pc is out or warranty so they won t talk to me. I KNOW Microsoft took all their download links down. They want you to get it from the manufacturer who won t talk to me. I DO get that. How can these people NOT provide this at Acer.
I certainly can SUPPORT and fix their pc if only i had the tools available. I m not looking to pay their third party who can t help me. I have the product code on the bottom of the PC. They should at least have this available if you log in and go to downloads under OS there is a tab with Nothing. You can still download the disk image from the microsoft website if you have the product key. Here is the link. You will need the product key on a sticker on the laptop to get the download.
Thank you for that but that link only allows for you to enter a key from software that was purchased independently. It does not allow to download software OEM version and attempting to enter the product key on the laptop I am working on gives the following response. The product key you ve entered appears to be for software which was pre-installed by the device manufacturer.
Please contact the device manufacturer for software recovery options. Acer is doing customers a great diservice by not putting the OS on their download tap that says OS in support. Additionally I have encountered the laptop requires a password to get into the BIOS. I KNOW my friend has no clue as to why she should even attempt to go to the BIOS. I cannot get the laptop to boot to the Windows disc. I was able to find an ISO.
Its a SHAME everyone just cuts people off when they could fix their own PC s. Then they could not gouge people for insane ammounts of money for recovery disks for something freely downloadable on the web. It sounds like this was a company laptop, since it had the Pro version of windows and a locked down bios. The hard drive is also probably encrypted and will need to be replaced if you don t have the code. I hope it is not a stolen machine. You will have to find the bios password, or else try a CMOS reset.
I am certain it is not a stolen machine. My friend is a 20 year veteran of the company she works for. Microsoft wants you to go to the OEM Acer but Acer does not offer the download. I ll have to rest the CMOS. It may have been their laptop, but it was most certainly not stolen. i mean they don t even have an email address that i can send questions too. ACER support site sucks and offers no solution that I can find. Does anybody know how to get around this.
99133 Points egydiocoelho 83487 Points MaClane 36522 Points brummyfan2 25288 Points JackE 21308 Points Kno63 16495 Points IVAN_PC 16387 Points billsey 13122 Points laurent_14 12667 Points xapim 11147 Points andylb. 100 Points egydiocoelho 45 Points Kno63 35 Points fibra 30 Points brummyfan2 30 Points JackE 29 Points hannahandrew 22 Points Mascotte1941 20 Points laurent_14 20 Points batmalin 17 Points SilvaGi. These -m options are defined for the i386 and x86-64 family of computers -mtune cpu-type Tune to cpu-type everything applicable about the generated code, except for the ABI and the set of available instructions.
The choices for cpu-type are generic Produce code optimized for the most common IA32 AMD64 EM64T processors. If you know the CPU on which your code will run, then you should use the corresponding -mtune option instead of -mtune generic. But, if you do not know exactly what CPU users of your application will have, then you should use this option.
As new processors are deployed in the marketplace, the behavior of this option will change. Therefore, if you upgrade to a newer version of GCC, the code generated option will change to reflect the processors that were most common when that version of GCC was released. There is no -march generic option because -march indicates the instruction set the compiler can use, and there is no generic instruction set applicable to all processors.
native This selects the CPU to tune for at compilation time by determining the processor type of the compiling machine. Using -mtune native will produce code optimized for the local machine under the constraints of the selected instruction set. Using -march native will enable all instruction subsets supported by the local machine hence the result might not run on different machines.
In contrast, -mtune indicates the processor or, in this case, collection of processors for which the code is optimized. i386 Original Intel s i386 CPU. i486 Intel s i486 CPU. No scheduling is implemented for this chip. i586, pentium Intel Pentium CPU with no MMX support. pentium-mmx Intel PentiumMMX CPU based on Pentium core with MMX instruction set support. pentiumpro Intel PentiumPro CPU.
i686 Same as genericbut when used as march option, PentiumPro instruction set will be used, so the code will run on all i686 family chips. pentium2 Intel Pentium2 CPU based on PentiumPro core with MMX instruction set support. pentium3, pentium3m Intel Pentium3 CPU based on PentiumPro core with MMX and SSE instruction set support. pentium-m Low power version of Intel Pentium3 CPU with MMX, SSE and SSE2 instruction set support. Used by Centrino notebooks. pentium4, pentium4m Intel Pentium4 CPU with MMX, SSE and SSE2 instruction set support.
prescott Improved version of Intel Pentium4 CPU with MMX, SSE, SSE2 and SSE3 instruction set support. nocona Improved version of Intel Pentium4 CPU with 64-bit extensions, MMX, SSE, SSE2 and SSE3 instruction set support. core2 Intel Core2 CPU with 64-bit extensions, MMX, SSE, SSE2, SSE3 and SSSE3 instruction set support. atom Intel Atom CPU with 64-bit extensions, MMX, SSE, SSE2, SSE3 and SSSE3 instruction set support.
k6 AMD K6 CPU with MMX instruction set support. k6-2, k6-3 Improved versions of AMD K6 CPU with MMX and 3DNow. instruction set support. athlon, athlon-tbird AMD Athlon CPU with MMX, 3dNOW.enhanced 3DNow. and SSE prefetch instructions support. athlon-4, athlon-xp, athlon-mp Improved AMD Athlon CPU with MMX, 3DNow. and full SSE instruction set support. k8, opteron, athlon64, athlon-fx AMD K8 core based CPUs with x86-64 instruction set support.
This supersets MMX, SSE, SSE2, 3DNow. and 64-bit instruction set extensions. k8-sse3, opteron-sse3, athlon64-sse3 Improved versions of k8, opteron and athlon64 with SSE3 instruction set support. amdfam10, barcelona AMD Family 10h core based CPUs with x86-64 instruction set support. This supersets MMX, SSE, SSE2, SSE3, SSE4A, 3DNow.ABM and 64-bit instruction set extensions. winchip-c6 IDT Winchip C6 CPU, dealt in same way as i486 with additional MMX instruction set support.
winchip2 IDT Winchip2 CPU, dealt in same way as i486 with additional MMX and 3DNow. c3 Via C3 CPU with MMX and 3DNow. c3-2 Via C3-2 CPU with MMX and SSE instruction set support. geode Embedded AMD CPU with MMX and 3DNow. While picking a specific cpu-type will schedule things appropriately for that particular chip, the compiler will not generate any code that does not run on the i386 without the -march cpu-type option being used.
-march cpu-type Generate instructions for the machine type cpu-type. The choices for cpu-type are the same as for -mtune. Moreover, specifying -march cpu-type implies -mtune cpu-type. -mcpu cpu-type A deprecated synonym for -mtune. -mfpmath unit Generate floating point arithmetics for selected unit unit. The choices for unit are 387 Use the standard 387 floating point coprocessor present majority of chips and emulated otherwise.
Code compiled with this option will run almost everywhere. The temporary results are computed in 80bit precision instead of precision specified by the type resulting in slightly different results compared to most of other chips. See -ffloat-store for more detailed description. This is the default choice for i386 compiler. sse Use scalar floating point instructions present in the SSE instruction set.
This instruction set is supported by Pentium3 and newer chips, in the AMD line by Athlon-4, Athlon-xp and Athlon-mp chips. The earlier version of SSE instruction set supports only single precision arithmetics, thus the double and extended precision arithmetics is still done using 387. Later version, present only in Pentium4 and the future AMD x86-64 chips supports double precision arithmetics too.
For the i386 compiler, you need to use -march cpu-type-msse or -msse2 switches to enable SSE extensions and make this option effective. For the x86-64 compiler, these extensions are enabled by default. The resulting code should be considerably faster in the majority of cases and avoid the numerical instability problems of 387 code, but may break some existing code that expects temporaries to be 80bit. This is the default choice for the x86-64 compiler. sse,387 sse 387 both Attempt to utilize both instruction sets at once.
This effectively double the amount of available registers and on chips with separate execution units for 387 and SSE the execution resources too. Use this option with care, as it is still experimental, because the GCC register allocator does not model separate functional units well resulting in instable performance.
-masm dialect Output asm instructions using selected dialect. Supported choices are intel or att the default one. Darwin does not support intel. -mieee-fp -mno-ieee-fp Control whether or not the compiler uses IEEE floating point comparisons. These handle correctly the case where the result of a comparison is unordered. -msoft-float Generate output containing library calls for floating point.
Warning the requisite libraries are not part of GCC. Normally the facilities of the machine s usual C compiler are used, but this can t be done directly in cross-compilation. You must make your own arrangements to provide suitable library functions for cross-compilation. On machines where a function returns floating point results in the 80387 register stack, some floating point opcodes may be emitted even 2 gale iq option -msoft-float is used.
-mno-fp-ret-in-387 Do not use the FPU registers for return values of functions. The usual calling convention has functions return values of types float and double in an FPU register, even if there is no FPU. The idea is that the operating system should emulate an FPU. The option -mno-fp-ret-in-387 causes such values to be returned in ordinary CPU registers instead.
-mno-fancy-math-387 Some 387 emulators do not support the sincos and sqrt instructions for the 387. Specify this option to avoid generating those instructions. This option is the default on FreeBSD, OpenBSD and NetBSD. This option is overridden when -march indicates that the target CPU will always have an FPU and so the instruction will not need emulation.
As of revision 2. 1, these instructions are not generated unless you also use the -funsafe-math-optimizations switch. -malign-double -mno-align-double Control whether GCC aligns doublelong doubleand long long variables on a two word boundary or a one word boundary. Aligning double variables on a two word boundary will produce code that runs somewhat faster on a Pentium at the expense of more memory. On x86-64, -malign-double is enabled by default. Warning if you use the -malign-double switch, structures containing the above types will be aligned differently than the published application binary interface specifications for the 386 and will not be binary compatible with structures in code compiled without that switch.
-m96bit-long-double -m128bit-long-double These switches control the size of long double type. The i386 application binary interface specifies the size to be 96 bits, so -m96bit-long-double is the default in 32 bit mode. Modern architectures Pentium and newer would prefer long double to be aligned to an 8 or 16 byte boundary. In arrays or structures conforming to the ABI, this would not be possible. So specifying a -m128bit-long-double will align long double to a 16 byte boundary by padding the long double with an additional 32 bit zero.
In the x86-64 compiler, -m128bit-long-double is the default choice as its ABI specifies that long double is to be aligned on 16 byte boundary. Notice that neither of these options enable any extra precision over the x87 standard of 80 bits for a long double. Warning if you override the default value for your target ABI, the structures and arrays containing long double variables will change their size as well as function calling convention for function taking long double will be modified.
Hence they will not be binary compatible with arrays or structures in code compiled without that switch. -mlarge-data-threshold number When -mcmodel medium is specified, the data greater than threshold are placed in large data section. This value must be the same across all object linked into the binary and defaults to 65535. -mrtd Use a different function-calling convention, in which functions that take a fixed number of arguments return with the ret num instruction, which pops their arguments while returning.
This saves one instruction in the caller since there is no need to pop the arguments there. You can specify that an individual function is called with this calling sequence with the function attribute stdcall. You can also override the -mrtd option by using the function attribute cdecl. See Function Attributes. Warning this calling convention is incompatible with the one normally used on Unix, so you cannot use it if you need to call libraries compiled with the Unix compiler.
Also, you must provide function prototypes for all functions that take variable numbers of arguments including printf ; otherwise incorrect code will be generated for calls to those functions. Normally, extra arguments are harmlessly ignored. -mregparm num Control how many registers are used to pass integer arguments. By default, no registers are used to pass arguments, and at most 3 registers can be used.
You can control this behavior for a specific function by using the function attribute regparm. In addition, seriously incorrect code will result if you call a function with too many arguments. Warning if you use this switch, and num is nonzero, then you must build all modules with the same value, including any libraries.
-msseregparm Use SSE register passing conventions for float and double arguments and return values. You can control this behavior for a specific function by using the function attribute sseregparm. This includes the system libraries and startup modules. Warning if you use this switch then you must build all modules with the same value, including any libraries. -mpc32 -mpc64 -mpc80 Set 80387 floating-point precision to 32, 64 or 80 bits.
When -mpc32 is specified, the significands of results of floating-point operations are rounded to 24 bits single precision ; -mpc64 rounds the significands of results of floating-point operations to 53 bits double precision and -mpc80 rounds the significands of results of floating-point operations to 64 bits extended double precisionwhich is the default. When this option is used, floating-point operations in higher precisions are not available to the programmer without setting the FPU control word explicitly.
Setting the rounding of floating-point operations to less than the default 80 bits can speed some programs by 2 or more. -mstackrealign Realign the stack at entry. Note that some mathematical libraries assume that extended precision 80 bit floating-point operations are enabled by default; routines in such libraries could suffer significant loss of accuracy, typically through so-called catastrophic cancellationwhen this option is used to set the precision to less than extended precision.
On the Intel x86, the -mstackrealign option will generate an alternate prologue and epilogue that realigns the runtime stack if necessary. This supports mixing legacy codes that keep a 4-byte aligned stack with modern codes that keep a 16-byte stack for SSE compatibility.
Coments:22.01.2020 : 14:52 Mimi:
Skrill, neteller, webmoney oppure su carta di credito visa o mastercard.
27.01.2020 : 18:40 Arashill:
FUR 1 JAHR ABONNEMENT Metatrader Nadex Trade Copier kopiert Trades von MT4 direkt auf Ihre Nadex Trading Platform und implementiert 2 gale iq option. Pilot direkt von Metatrader.
22.01.2020 : 18:16 Shakabar:
GMB Landing Page. Google My Business Listing.